MEMOLUB® EPS Multi Point Lubricator
External power source 24V
Its 25 Bar ejection pressure permits the use of distribution blocks from 2 to 8 outlets
Content of 120 cm3 – 240 cm3 or 480 cm3 and 5 daily output programs of 0.3 to 14.4 cm3.
Settings from 1 week to 24 months through the MEMO rings (see technical data’s table).
With its 25 Bar pressure, it can be installed remotely up to 10 meters from lube point or can be used up to 8 points with distributor blocks.
| Cartridge capacity | Standard : 120 cm3 / Méga : 240 cm3 / Giga : 480 cm3 |
| Dimensions | Standard : 115 x 101 mm / Méga : 147 x 101 mm / Giga : 228 x 101 mm |
| Power Supply | 24V |
| Temperature exposure range | -15° C à +50°C |
| Direct connection | 1/4 inch R |
Its external power supply is the solution for your applications not working continuously.
Directly linked to the machine, EPS model only lubricates when machine is rotating.
Can be used in very cold environment.
Frequency setting is regulated by the MEMO.
This MEMO is a unique system to adjust Memolub daily output. MEMO is set once when unit is installed and is then permanently fitted to the lube point.
Maintenance personnel does not need to worry of setting anymore, this facilitate greatly lube organisation. MEMO setting is an easy and quick operation (see basic settings table in the Technical data’s part”)
The only replaceable consumables are plastic recyclable cartridges and the set of batteries.
Endless refillable, the environmental impact is limited.
Ideal for all types of industrial applications : bearings, open gears, chains, rollers,…